60mm Aluminium Delft Casting Ring and 1 Kg of Genuine Delft Clay Kit Gold silver
 
The Kit contains:
 
1Kg of Delft Clay
60mm Aluminium Casting Ring
Brass Sprue Forming Mandrel
Instruction Sheet

Delft Clay is an easy way to create inexpensive castings from almost any solid material from wax to wood. The Delft Clay Method is a highly refined form of sand casting. Delft Clay is much finer than casting sand, providing remarkably sharp and highly detailed castings in gold, silver, copper-based alloys, pewter, etc. Castings produce very fine detailed castings requiring very little finishing. The Delft Clay can be reused multiple times after any burnt or scorched clay is removed after casting.
 
Since this is a cold-moulding process, moulds can be made from patterns composed of wood, wax, epoxy, plastics, and, of course, metal. The delft clay casting system is a type of sand casting, therefore it is best suited to producing castings without pronounced undercuts.
 
The two part 60mm Aluminium Delft style interlocking casting ring is made from aluminium. It has a large side entry hole to allow vertical or horizontal casting. It allows the easy duplication of wax, metal, plastic or wooden patterns. The interlocking section are precision made to ensure an accurate fit and there is a small hole within interlocking section to allow accurate alignment of the under and lower sections. The internal casting void has a diameter of 63mm and the height is 66mm. Casting ring walls are 4.5mm thick
 
The brass mandrel is used to form the passage within the sand mould that the molten metal will pass through. The Mandrel is length is 50 mm Max diameter 14 mm and 2.95 mm shank.
 
ALWAYS USE APPROPRIATE SAFETY PROTECTION WHEN HANDLING MOLTEN METAL!
 
Please see our other listings.
 
Any questions please contact me.